Не запускается X на Radeon x300
dolphin 28 Августа, 2009 - 11:53
Подскажите пожалуйста что не так....
ноут Samsung R50 там карточка х300
ati-drivers --не запустился модуль
x11-drm --стоит сейчас
dolphin ~ # lspci -v | grep -i -A18 VGA
01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Mobility Radeon X300] (prog-if 00 [VGA controller])
Subsystem: Samsung Electronics Co Ltd Device e000
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d0000000 (32-bit, prefetchable) [=128M]
I/O ports at 3000 [=256]
Memory at c0100000 (32-bit, non-prefetchable) [=64K]
[virtual] Expansion ROM at c0120000 [disabled] [=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint, MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
Capabilities: [100] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: radeonfb
dolphin ~ # lsmod
Module Size Used by
radeon 116632 0
drm 126540 1 radeon
ipw2200 118328 0
libipw 22900 1 ipw2200
dolphin ~ # cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "on"
#Option "NoPM" "true"
EndSection
Section "Files"
ModulePath "/lib/modules/2.6.30-gentoo-r4/"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "record"
Load "dri2"
Load "dri"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse1"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
#ModelName "Acer AL1715"
DisplaySize 340 270
HorizSync 24.0 - 80.0
VertRefresh 49.0 - 75.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
BusID "PCI:01:00:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
dolphin ~ # startx
hostname: Unknown host
xauth: creating new authority file /root/.serverauth.15174
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-gentoo-r4 i686
Current Operating System: Linux dolphin 2.6.30-gentoo-r4 #6 SMP Thu Aug 27 17:03:45 Local time zone must be set--see zic i686
Build Date: 25 August 2009 06:33:46AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 28 07:46:00 2009
(==) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "radeon" (module does not exist, 0)
(EE) No drivers available.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
dolphin ~ # cat /var/log/Xorg.0.log | egrep "WW|EE"
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
(WW) The directory "/usr/share/fonts/TTF/" does not exist.
(WW) The directory "/usr/share/fonts/OTF" does not exist.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) Loading extension MIT-SCREEN-SAVER
(WW) Warning, couldn't open module radeon
(EE) Failed to load module "radeon" (module does not exist, 0)
(EE) No drivers available.
»
- Для комментирования войдите или зарегистрируйтесь

dolphin написал(а): (EE)
готов поспорить в make.conf в секции VIDEO_CARDS не стоит radeon...
make.conf в студию. телепаты сокращены всвязи с мировым экономическим кризисом.
dolphin ~ # cat
вывод этого в студию emerge
вывод этого в студию
dolphin ~ #
флаги помченные звездочкой
флаги помченные звездочкой означают, что пакет скопилирован с этим флагом, но в make.conf стоит на данный момент другой.
emerge -uND world сделайте и будет Вам счастье ;) он подтянет драйверы ati.
по вопросам что такое "-uND" читать man emerge.
выведите сюда ради интереса emerge -pvuND world....
Спасибо сейчас попробую....
Спасибо сейчас попробую.... просто пытался сначала поставить ati-drivers....
и modproobe ругался типа Cannot allocate memory ... за два дня так и не разобрался...
а с Gentoo не так давно разбираюсь, раньше сидел на SlackWare поэтому плоховато пока разбираюсь
dolphin ~ # emerge -pvuND
такое ощущение, что Вы
такое ощущение, что Вы перешли с ~x86 на x86 и половина пакетов хочет даунгрейдится....
думаю лучше поставить ~x86 и ставить xorg-server 1.6...
вообще в ~x86 я особо проблем не вижу... хотя и считается нестабильной веткой....
я понимаю что вопрос может
я понимаю что вопрос может показаться дуратским но как это сделать???
всмысле преейти на ~x86
добавить в /etc/make.conf
добавить в /etc/make.conf строчку:
:wq
оно вам надо? оставайтесь на
оно вам надо? оставайтесь на x86. Меньше проблем буит... в общем emerge -uDN world
Спасибо все заработало ....
Спасибо все заработало .... но теперь при выходе из иксов случается kernel panic